-Remote Wi-Fi 6E APs ideal for mission-critical remote work and small branches provide flexible coverage across any two bands (2.4 GHz, 5 GHz, and 6 GHz) for up to 3.6 Gbps combined peak data rate.

-Stay connected using backup or primary cellular connectivity with optional CAT 12 module that includes antennas and a high-speed interface for LTE connectivity.

-Convenient wired connectivity with 2.5 Gbps uplink/downlink Ethernet port and multiple 1 Gbps Ethernet ports.

-Zero Touch Provisioning provides ease of implementation in branch offices and remote sites, without on-site technical expertise.

-Managed through cloud-native HPE Aruba Networking Central to extend the WAN to home offices, small offices, and even temporary locations.

Brand: HP

Product: HP Aruba Networking 600R Remote Access Points

Certifications: Wi-Fi Alliance (WFA): Wi-Fi CERTIFIED a, b, g, n, ac; Wi-Fi CERTIFIED 6E (ax, 6GHz); WPA, WPA2 and WPA3 – Enterprise with CNSA option, Personal (SAE), Enhanced Open (OWE); WMM, WMM-PS, Wi-Fi Agile Multiband; Bluetooth SIG; Ethernet Alliance (PoE, PSE device, Class 3)

Input voltage: 48V/5W DC

Regulatory: FCC/ISED; CE Marked; RED Directive 2014/53/EU; EMC Directive 2014/30/EU; Low Voltage Directive 2014/35/EU; UL/IEC/EN 60950; IEC/EN 62368-1; EN 60601-1-1, EN60601-1-2

Wi-Fi antenna: Integrated omni-directional antennas for 2x2 MIMO with peak antenna gain of 5.5d Bi in 2.4 GHz, 5.5 dBi in 5 GHz and 5.5 dBi in 6 GHz. Built-in antennas are optimized for horizontal desk-mounted orientation of the AP.

Connectivity, standard: Wi-Fi 6E bands: 2.4 GHz, 5 GHz, 6 GHz plus an add-on cellular module for primary or backup connectivity.

Ports: Uplink (E0): Ethernet wired network port (RJ-45); Up-/downlink (E1): Ethernet wired network port (RJ-45); Downlink (E1-E3): Ethernet wired network ports (RJ-45); DC power interface; USB 2.0 host interface (Type A connector); Cellular radio module interface (accessible after removing the back cover); Serial console interface (proprietary, micro-B USB physical jack); Kensington security slot.

Mounting: The AP is intended to be desk mounted; the integrated antennas are optimized for that. See the ordering guide.

Power consumption: Maximum (worst-case) power consumption: 40W; Maximum (worst-case) power consumption in idle mode: 4.9W.

Radio coverage: Indoor, tri-radio, 2.4GHz, 5GHz and 6GHz (dual concurrent) 802.11ax 2x2 MIMO.

Warranty: Limited lifetime hardware warranty.